loading
JY206
| SKU: | |
|---|---|
| Availability: | |
| Quantity: | |
Model: JY025
Material: POM
Dimensions: 115 × 80 × 3mm
The JY025 Four-Hole Hand Guard is a purpose-built wrist protection accessory manufactured — a factory with over a decade of experience in plastic accessories and protective gear components. Engineered from high-performance POM (polyoxymethylene), this hand guard delivers a reliable balance of structural support, breathability, and mobility across sports, industrial, and daily-use scenarios.
Annaifu serves global brands including Adidas and NIKE with OEM/ODM plastic components. Our factory supports custom hand guard production with a minimum batch of 5,000 pieces and 72-hour proofing for qualified partners.
| Parameter | Details |
|---|---|
| Model | JY025 |
| Material | POM (Polyoxymethylene) |
| Dimensions | 115 × 80 × 3mm |
| Hole Count | 4 circular breathable holes |
| Surface Finish | Smooth edge treatment |
| Fixing Method | Elastic structure / strap (style-dependent) |
| Certifications | ISO, GRS, OEKO-TEX, BSCL |
The four evenly distributed circular holes accelerate air circulation across the wrist surface. This reduces heat buildup and sweat accumulation during extended wear — a critical factor for athletes and manual workers who use protective gear for hours at a time.
POM is selected for its high stiffness-to-weight ratio and low friction coefficient. The guard provides firm wrist support without limiting natural joint movement. It resists deformation under repeated mechanical stress, making it suitable for high-frequency use scenarios.
The guard conforms closely to wrist anatomy. Its surface texture and curvature prevent displacement during dynamic activities — no readjustment needed mid-task or mid-exercise.
At 3mm thickness, the JY025 adds minimal bulk. Users maintain full dexterity while receiving meaningful protection from friction, abrasion, and low-impact collisions.
All edges are processed to eliminate sharp contact points. This prevents skin irritation during prolonged wear — a standard requirement for protective accessories used in both consumer and industrial markets.
The guard's curved body aligns with the natural wrist structure. During force-exerting tasks, it assists in stabilizing wrist posture, reducing the risk of strain from repetitive motion.
The JY025 consists of a single curved, flexible main body shaped to fit the wrist's dorsal surface. Four circular breathable holes are distributed evenly across the face. Edges are smooth-finished for comfort. The guard is secured via an elastic structure or adjustable strap system depending on the production variant, ensuring a snug, non-slip fit across different wrist sizes.
(Product images and dimensional diagrams retained as per original layout.)
The JY025 Four-Hole Hand Guard is designed for use across three primary categories. Learn more about how Annaifu products serve diverse industries at our Industries page.
Gym training and weight lifting
Ball sports (basketball, volleyball, tennis)
Outdoor hiking and trail running
Cycling and skateboarding
Warehousing and logistics handling
Manual assembly and repetitive tool operation
Light construction tasks requiring wrist stability
Gardening and home repair
Wrist support for mild repetitive strain
Rehabilitation and post-injury protective wear
As a plastic buckle and protective accessory manufacturer and exporter based in Quanzhou, China, Annaifu brings over 10 years of B2B production experience to every order.
Factory Direct: 50 CNC injection molding machines, annual capacity over 1 billion pieces
OEM/ODM Capable: Custom dimensions, colors (Pantone matched), LOGO engraving (laser or in-mold)
Certified Quality: ISO, GRS, OEKO-TEX Standard 100, BSCL
Fast Proofing: Standard 2–3 weeks; VIP channel: 72 hours
Flexible MOQ: From 5,000 pieces per batch
Q: What material is the JY025 hand guard made from?
A: The JY025 is made from POM (polyoxymethylene), a high-performance engineering plastic known for its stiffness, low friction, and resistance to deformation under repeated stress.
Q: Can the hand guard be customized with our brand logo?
A: Yes. Annaifu supports laser engraving and in-mold injection molding for LOGO integration. Logo wear resistance is tested to 5,000 friction cycles.
Q: What is the minimum order quantity for bulk supply?
A: The minimum order is 5,000 pieces per batch. Flexible production scheduling is available for replenishment orders.
Q: Does the product pass environmental certifications?
A: Yes. Annaifu products comply with OEKO-TEX Standard 100. GRS-certified recycled material options are available upon request.
Q: How long does custom development take?
A: Standard proofing takes 2–3 weeks from design confirmation. For strategic partners, our VIP channel compresses this to 72 hours through parallel engineering workflows.
Q: Is the hand guard suitable for use in cold environments?
A: POM maintains structural integrity across a wide temperature range. For specific cold-resistance requirements (e.g., below -20°C), contact our technical team for material alternatives.
Model: JY025
Material: POM
Dimensions: 115 × 80 × 3mm
The JY025 Four-Hole Hand Guard is a purpose-built wrist protection accessory manufactured — a factory with over a decade of experience in plastic accessories and protective gear components. Engineered from high-performance POM (polyoxymethylene), this hand guard delivers a reliable balance of structural support, breathability, and mobility across sports, industrial, and daily-use scenarios.
Annaifu serves global brands including Adidas and NIKE with OEM/ODM plastic components. Our factory supports custom hand guard production with a minimum batch of 5,000 pieces and 72-hour proofing for qualified partners.
| Parameter | Details |
|---|---|
| Model | JY025 |
| Material | POM (Polyoxymethylene) |
| Dimensions | 115 × 80 × 3mm |
| Hole Count | 4 circular breathable holes |
| Surface Finish | Smooth edge treatment |
| Fixing Method | Elastic structure / strap (style-dependent) |
| Certifications | ISO, GRS, OEKO-TEX, BSCL |
The four evenly distributed circular holes accelerate air circulation across the wrist surface. This reduces heat buildup and sweat accumulation during extended wear — a critical factor for athletes and manual workers who use protective gear for hours at a time.
POM is selected for its high stiffness-to-weight ratio and low friction coefficient. The guard provides firm wrist support without limiting natural joint movement. It resists deformation under repeated mechanical stress, making it suitable for high-frequency use scenarios.
The guard conforms closely to wrist anatomy. Its surface texture and curvature prevent displacement during dynamic activities — no readjustment needed mid-task or mid-exercise.
At 3mm thickness, the JY025 adds minimal bulk. Users maintain full dexterity while receiving meaningful protection from friction, abrasion, and low-impact collisions.
All edges are processed to eliminate sharp contact points. This prevents skin irritation during prolonged wear — a standard requirement for protective accessories used in both consumer and industrial markets.
The guard's curved body aligns with the natural wrist structure. During force-exerting tasks, it assists in stabilizing wrist posture, reducing the risk of strain from repetitive motion.
The JY025 consists of a single curved, flexible main body shaped to fit the wrist's dorsal surface. Four circular breathable holes are distributed evenly across the face. Edges are smooth-finished for comfort. The guard is secured via an elastic structure or adjustable strap system depending on the production variant, ensuring a snug, non-slip fit across different wrist sizes.
(Product images and dimensional diagrams retained as per original layout.)
The JY025 Four-Hole Hand Guard is designed for use across three primary categories. Learn more about how Annaifu products serve diverse industries at our Industries page.
Gym training and weight lifting
Ball sports (basketball, volleyball, tennis)
Outdoor hiking and trail running
Cycling and skateboarding
Warehousing and logistics handling
Manual assembly and repetitive tool operation
Light construction tasks requiring wrist stability
Gardening and home repair
Wrist support for mild repetitive strain
Rehabilitation and post-injury protective wear
As a plastic buckle and protective accessory manufacturer and exporter based in Quanzhou, China, Annaifu brings over 10 years of B2B production experience to every order.
Factory Direct: 50 CNC injection molding machines, annual capacity over 1 billion pieces
OEM/ODM Capable: Custom dimensions, colors (Pantone matched), LOGO engraving (laser or in-mold)
Certified Quality: ISO, GRS, OEKO-TEX Standard 100, BSCL
Fast Proofing: Standard 2–3 weeks; VIP channel: 72 hours
Flexible MOQ: From 5,000 pieces per batch
Q: What material is the JY025 hand guard made from?
A: The JY025 is made from POM (polyoxymethylene), a high-performance engineering plastic known for its stiffness, low friction, and resistance to deformation under repeated stress.
Q: Can the hand guard be customized with our brand logo?
A: Yes. Annaifu supports laser engraving and in-mold injection molding for LOGO integration. Logo wear resistance is tested to 5,000 friction cycles.
Q: What is the minimum order quantity for bulk supply?
A: The minimum order is 5,000 pieces per batch. Flexible production scheduling is available for replenishment orders.
Q: Does the product pass environmental certifications?
A: Yes. Annaifu products comply with OEKO-TEX Standard 100. GRS-certified recycled material options are available upon request.
Q: How long does custom development take?
A: Standard proofing takes 2–3 weeks from design confirmation. For strategic partners, our VIP channel compresses this to 72 hours through parallel engineering workflows.
Q: Is the hand guard suitable for use in cold environments?
A: POM maintains structural integrity across a wide temperature range. For specific cold-resistance requirements (e.g., below -20°C), contact our technical team for material alternatives.
